Pololu USB AVR Manual de usuario descargar pdf (Pagina 40)

avrdude -p m328p -c avrisp2 -P /dev/cu.usbmodem00022331 -U flash:w:test.hex

If all goes well, the output should look something like this:

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.01s

avrdude: Device signature = 0x1e950f

avrdude: NOTE: FLASH memory has been specified, an erase cycle will be performed

To disable this feature, specify the -D option.

avrdude: erasing chip

avrdude: reading input file "test.hex"

avrdude: input file test.hex auto detected as Intel Hex

avrdude: writing flash (3392 bytes):

Writing | ################################################## | 100% 0.88s

avrdude: 3392 bytes of flash written

avrdude: verifying flash memory against test.hex:

avrdude: load data flash data from input file test.hex:

avrdude: input file test.hex auto detected as Intel Hex

avrdude: input file test.hex contains 3392 bytes

avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 0.72s

avrdude: verifying ...

avrdude: 3392 bytes of flash verified

avrdude: safemode: Fuses OK

avrdude done. Thank you.

5. Getting Started in Mac OS X Page 40 of 54

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 53 54

Sin comentarios

Pololu USB AVR Manual de usuario Pagina 40